single row angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle. The contact angle a is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis

It include the following types:

- single row angular contact ball bearings 

- double row angular contact ball bearings 

-four-point contact ball bearings

ANGULAR CONTACT BALL BEARINGS

Mounting

/DB:mount in duplex, back to back

/DF:mount in duplex, face to face

/DT:mount in duplex, tandem

Internal structure:

C:normal contact angle a=15°

AC: normal contact angle a=25°

B: normal contact angle a=40°

Product range: bore diameter from 10mm to 240mm