Prefessional bearings manufacture with auto bearings and industrial bearings in China


Taper Roller Bearing Products


Tapered Roller Bearings
1) ID over 35mm. 2) Non-standard tapered wheel bearing. 3) Accurate grades include P0, P6, P5, P4. 4) Vibration grade is over Z1.

Taper Roller Bearing
Material: Chrome Steel. Precision: ABEC-1~ABEC-5. Noise Level: Z1~Z3. Vibration: V1~V3. Grease: All kinds of grease. Cage: Steel or Nylon

Tapered Roller Thrust Bearings
The tapered thrust can only carry axial loads in one direction, and limit the axial displacement in one direction, so they can be located axially. By comparison with cylindrical roller thrust bearings, they have higher load carrying capacity, relatively lower slide, but limiting speed is lower. The machined steel or brass cages are used in tapered roller thrust bearings. The tapered roller thrust bearings are widely used in construction automotives, generator equipments, etc.. 1. Single direction tapered roller thrust bearings; 2. Double direction tapered roller thrust bearings.

Thrust Taper Roller Bearing
Single row cylindrical roller bearing, bears the radial force in normal. In comparison with the ball bearing in same size, the radial bearing force increases by 1.5-3 times. It has a high rigidity and impact strength, especially suitable for the shaft for rigid support, double supporting short shaft and the shaft for which axial displacement results from heat extension or the accessories equipped with separate bearing for which it is required to mount and dismount the machine.

Tapered Roller Bearings
Used in automobile rear axle wheel hub, heavy machine tool main shaft, big power reduction gear, axletree axle box, roller wheel of transportation device, the supporting roller and working roller of the rolling mill, etc.

Tapered Roller Bearing Of Auto Bearings
The roller in this bearing is tapered similar to a cone with the point cut off. This bearing must be well aligned due to the rigid length of the roller. Excessive misalignment will cause edge loading of the roller and quick failures. This bearing does not run at very high speeds but is designed for high load applications. It will carry both heavy radial and combination thrust loads. Common applications are automotive wheel bearings, speed reducers and industrial equipment. This bearing is generally supplied as a non sealed separable two piece bearing. The bearing clearance must be adjusted during the assembly process.

Taper Roller Bearings
1) Designed on the basis of FEA analysis. 2) Reinforced structure. 3) Provided with a convex structure. 4) Advance processed rolling raceway surface enables high precision. 5) For transmission, differentials and auto axles

Tapered Roller Bearings
specialized manufacturer of various tapered roller bearing,tapered roller bearings are a unique subset of axial roller bearings in which the rollers are tapered rather than straight right cylindrical. tapered roller bearing features: 1) Material: GCR15. 2) HRC: 60-65. 3) Four interdependent components: inner ring, outer ring, tapered rollers, and roller retainer.

Tapered Roller Bearings
We supply single-row tapered roller bearings, single-row inch tapered roller bearings, double-row tapered roller bearings, double row tapered roller bearings with flanged cup, and double-row inch tapered roller bearings. Unit bearings: Set9: Locking collar, u298/u261l ; Set10: Locking collar, u399/u360l ; Set20(m 365l): Locking collar, u399a/u365l ; M497: Locking collar, u499/u460l.

Tapered Roller Bearings
1) Tapered roller bearings are a unique subset of axial roller bearings in which the rollers are tapered rather than straight right cylindrical 2) The roller shape allows thrust loads to be withstood in addition to the radial loads
3) A familiar application for tapered roller bearings is the central hub bearings for automobile wheels 4) When an auto traverses a turn, the wheels must withstand a significant lateral force, so that tapered roller bearings are necessary 5) Suitable for use under heavy load or impact load conditions 6) The tapered rollers assembled in these bearings are guided by the cone back face rib 7) Raceway surfaces of the cone and cup so that the respective apexes converge at a point on the bearing centerline 8) Used in automobile rear axle wheel hubs, heavy machine tool main shafts, big power reduction gears, axletree axle boxes, roller wheels of transportation device, and the supporting rollers and working rollers of the rolling mill

Relationship Bearing News